[Tester] Regarding the setting of the application repetition cycle for electrostatic discharge testing, the main unit can be set for a minimum test setting of 0.05 s. Is a 0.05 s test also possible when using a 500 pF-0Ω CR unit?

[Tester] Regarding the setting of the application repetition cycle for electrostatic discharge testing, the main unit can be set for a minimum test setting of 0.05 s. Is a 0.05 s test also possible when using a 500 pF-0Ω CR unit?

When using a 500 pF-0Ω CR unit, the minimum is 0.2 s.
The recommended minimum setting for the repetition cycle depends on the constants of the CR unit.
The setting itself is possible, but sufficient charging cannot be performed, so the specified application cannot be achieved.

With the standard 150 pF, 330Ω, a 0.05 s test setting is possible.