[Tester] A stabilized power supply was connected as the input to the power supply voltage variation tester VDS-2002, and with nothing connected to the output, current was measured with a clamp meter between the stabilized power supply and the VDS. Current
[Tester] A stabilized power supply was connected as the input to the power supply voltage variation tester VDS-2002, and with nothing connected to the output, current was measured with a clamp meter between the stabilized power supply and the VDS. Current
Because a waveform correction capacitor and absorber are installed between the power lines, no-load current flows, but it is not considered to be a failure.
(This is not a confirmation item in the inspection at the time of shipment.)