How is the tester setup performed?

How is the tester setup performed?

The tester setup is specified in detail, including the placement and connection method of the test object. The following are examples of a typical setup: Tabletop equipment: A wooden table 0.8 m high is placed on the ground plane, and a horizontal coupling plane (1.6 m × 0.8 m) is placed on it. The horizontal coupling plane is connected to the ground plane through two 470 kΩ resistors. Floor-standing equipment: An insulating support 0.1 m high is placed on the ground plane, and the EUT is placed on it. The vertical coupling plane is also connected to the ground plane with two 470 kΩ resistors.